Hamlet and Fate - 1387 Words

Harold Bloom says the genius of Shakespeare is that â€Å"Characters develop rather than unfold, and they develop because they reconceive themselves† (The Invention of the Human XVII). Shakespeare’s tragedy Hamlet, shows the development of Hamlet within the land of Denmark. Hamlet goes through many changes throughout the five acts, but these changes are not entirely due to the events of the play, but rather to Hamlet’s confrontations with himself. He battles with his mind through soliloquys, he overhears himself speaking, and he always questions himself and the world because he is unable to accept any belief. It is not until the last act that he comes to any conclusion: an acceptance of fatalism, a philosophy that states that all events are†¦show more content†¦He never says that he believes in God or in good or evil because he always questions everything. He questions the ghost, death, choice, nihilism but he never believes in anything until the final a ct. After returning from his exile, Hamlet visits a cemetery. This is perhaps the most famous scene in all of literature: Hamlet holding up the skull of Yorick. Act 5 is strange because Hamlet seems to have become calmer, as if he transformed over his exile, and he is not so much at odds with the idea of death. Hamlet looks straight into death’s eyes and it does not frighten him. In fact, he tells a series of jokes. He speaks of other famous princes who have long since been dead and he recognizes his own fate. When Hamlet is preparing for the duel with Laertes, he tells Horatio of what he had discovered lying in bed the night before. He says â€Å"there’s a divinity that shapes our ends†(5.2.10). This quote is explicitly fatalistic and expresses a higher order that structures our lives, or at least our deaths. Horatio tells Hamlet that he should not fight because he believes Hamlet will lose and suspects it is a trap. Hamlet knows that it is a trap. He knows that he is to face death and he accepts his fate by accepting the duel. He is resolute on fighting and not thinking. No longer does he call himself a coward or question the role that he plays in these events; in this final scene he says: There isShow MoreRelatedHamlet essay on emotion, fate and reason1241 Words   |  5 Pagesof mind. In the Shakespearian play Hamlet, the death of Hamlets father caused many problems, all of which eventually lead up to the tragic death of Hamlet. Each event that happens in the play is imp acted by reason, fate and emotion. The events throughout the play that lead to hamlets downfall are determined by the roles of reason, fate and emotion. These three roles are key factors of the play. Reason plays the role of advancing the plot, especially when hamlet devises a plan to reassure the predicationRead MoreWilliam Shakespeare s Hamlet - Deciding Fate949 Words   |  4 Pages2/14/16 Deciding Fate In Shakespeare’s Hamlet, Hamlet is a prince, who has been tasked to avenge his murdered father. As the ghost of his dead father assigns him this deed, Hamlet assumes it is now his fate to murder the king and cut the corruption out of the kingdom. As the play progresses, Hamlet does not actively attempt to assassinate the King, revealing his hope that he has free-will in the matter. Near the end of the play, Hamlet experiences a transformation, believing that fate in inevitableRead MoreHamlet vs. Oedipus1493 Words   |  6 PagesHamlet vs Oedipus Hamlet by William Shakespeare and Oedipus the King by Sophocles are both tragic stories which contain many elements of which are similar and different. Although both Hamlet and Oedipus suffer from fate, Hamlet’s father is murdered by his brother Claudius, while Oedipus kills his own father. Both Hamlet and Oedipus have the opportunity to shun their fate, but the two men believe themselves to be the only individual who can resolve the predicament which they are faced with. TheRead MoreRosencrantz And Guildenstern Are Dead And Hamlet Analysis1294 Words   |  6 Pagesmost well known playwrights during their respective centuries they lived in. Shakespeare’s publication of Hamlet became a very popular play to read and watch. In Hamlet, the main character, Prince Hamlet, is in a great dilemma. His father is killed by his uncle Claudius, so then Claudius is able to take the throne and become the King of Denmark. Hamlet finds this out from the ghost, and Hamlet is not s ure how to avenge his father’s death or whether he should even attempt to. In Rosencrantz and GuildensternRead MoreHarold Bloom Says The Genius Of Shakespeare Is That â€Å"Characters1325 Words   |  6 PagesHarold Bloom says the genius of Shakespeare is that â€Å"Characters develop rather than unfold, and they develop because they reconceive themselves† (The Invention of the Human XVII). Shakespeare’s tragedy Hamlet, shows the development of Hamlet within the land of Denmark. Hamlet goes through many changes throughout the five acts, but these changes are not entirely due to the events of the play, but rather to Hamlet’s confrontations with himself. He battles with his mind through soliloquys, he overhearsRead MoreA Pleasant Demise in Shakespeares Hamlet1081 Words   |  4 PagesShakespeare’s The Tragedy of Hamlet, Prince of Denmark embodies a different, more accepted role. As the tragic aspect of the play comes to fruition with the death of Hamlet, death becomes accepted. With his confidence in fate, his desensitization to death, and the completion of his goals, Hamlet dies satisfied with himself. One of the strongest coping methods for the inevitable reality of death today is religion, where the idea of God’s plan closely aligns with the concept of fate. The evolution of Hamlet’sRead MoreRosencrantz Guildenstern Are Dead, A Satirical Piece That Parodies Hamle921 Words   |  4 PagesGuildenstern Are Dead is a satirical piece of work that parodies Hamlet, especially in terms of death, a common theme in both. These two plays take different views on death portrayed by the protagonists of each: either Hamlet or Rosencrantz Guildenstern. Hamlet is a tragedy with comedy elements in it. It is about a prince who seeks revenge for his father’s assassination, but in the end, he dies. Throughout the entire play, Hamlet is in constant conflict within his mind. He doesn’t know whatRead MoreMorality And Redemption : An Admirable Treatise On The Nature Of Guilt And Individual Fate1640 Words   |  7 Pagesdeserves a certain fate, no matter how grave? Do guilt or remorse mitigate one’s deserving whatever fate befalls them, or does someone’s deserving whatever fate befalls them depend solely on what they have done? These are questions as old as humanity, but, fortunately, individuals like Shakespeare seek to respond to them through their works. Shakespeare’s Hamlet provides an admirable treatise on the nature of guilt and individual fate, especially with regard to the eponymous Hamlet, his father, hisRead MoreHamlet and The Desire-Destiny Paradox872 Words   |  3 Pagesquoted line of Ham let, of Shakespeare’s works, possibly of all Elizabethan literature, presents a philosophical Hamlet who questions â€Å"Whether ’tis nobler in the mind to suffer, The slings and arrows of outrageous fortune, Or to take arms against a sea of troubles,† Shakespeare does indeed explore the individual’s enduring need to define one’s role or identity within society, but presents the paradox of whether to embrace one’s fortune OR to ‘carve for himself’ a fate and identity. Hamlet spends muchRead MoreExamining the Tragic Protagonists of Oedipus Rex and Hamlet657 Words   |  3 Pagestragedies, â€Å"Oedipus Rex† and â€Å"Hamlet†, both main characters are generally good. In either play, both Hamlet and Oedipus make a flaw that will cost them an extreme suffering, and in â€Å"Hamlet†, that concludes in many deaths. A tragic protagonist is usually one of noble authority, who upholds a position high in society. In a tragedy, the protagonist falls from high to low, through the suffering they endure. During his fall from high to low, the protagonist is unable to escape his fate, though he may try so

Analysis Of The Poem Mark Strand - 959 Words

Jamie Wiederholt Mrs. Carson AP Literature 8 December 2015 Mark Strand Mark Strand once said, For some of us, the less said about the way we do things the better.(Strand). In this he might have been referring to his poems. He wrote straightforward surrealistic poems about the nature of life with ambiguous speakers. It is common to see in his poems a story being told without actually telling one. In this way there is a sense of who the speaker is, who the poet is, and a peculiar train of thought expressed with very precise words. Mark Strand was greatly influenced by his time period. The influence of surrealism, a popular form of art in the twentieth century, is prevalent throughout his poems. Mark Strand states in his poet laureate interview that he wished to be like the other poets of his time. He was influenced by Wallace Stevens and Lorca when he was a college student at Yale. In college, he started as an artist and ended as a poet (Nordhaus). His poem, â€Å" Eating Poetry† expresses his love for poetry in a curious way, â€Å"I have been eating poetry†(3). To help bring to light his own personal feelings, he uses surrealistic imagery. He enjoys poetry to an extent that words cannot express, but he does the impossible with this poem when he expresses his enjoyment through the consumption of poetry. â€Å"Their blond legs burn like brush†(11), the dogs being described in this quote represent the freed self in an animalistic way, while the librarian in this poem represents a moreShow M oreRelatedAnalysis Of The Poem Poor North By Mark Strand1179 Words   |  5 PagesMark Strand’s poem, â€Å"Poor North† depicts the life of a married couple facing countless struggles during a harsh winter. It tells of a man working in an unsuccessful store while his wife sits at home, wishing for her old life back. The way the wife copes with her sadness is both intriguing and perplexing. She misses her old life, even though it is described to have not been special; however, the wife may be a person who never feels satisfied or fulfilled by the external world due to internal conflictRead MoreThe Love Song of J. Alfred Prufrock Essay1524 Words   |  7 Pagesï » ¿Question: Part A: Analyze the social and historical context of a particular poem Poem: T. S. Eliot, ‘The Love Song of J. Alfred Prufrock The context of any given text whether poetry, novels or a movie is always integral to its understanding. Social and historical context of not only the given text, but the writer’s context and reader’s context play an important role in the interpretation and understanding of the major ideas, issues, values and beliefs within the text. T.S (Thomas Stearns) EliotRead MoreThe Relationship Between Man and God Essay2522 Words   |  11 PagesGerard Manley Hopkins’ poem â€Å"Carrion Comfort† was written after his ordainment as a Jesuit priest, and his conversion from a High Church Anglican. At the time of his ordainment, Manley Hopkins believed practicing poetry interfered with his relationship with God and thus led him to give up poetry almost entirely for seven years. However, in 1872 he recanted this belief and returned to writing. In 1884 he accepted a position teaching Greek and Latin at the University College Dublin. During his timeRead MoreKubla Khan a S upernatural Poem8401 Words   |  34 Pages| AbstractThis essay discusses the question of the transforming creative self and the aesthetics of becoming in Samuel Taylor Coleridge s Kubla Khan and Dejection: An Ode , by reassessing certain strands of Romantic visionary criticism and Deconstruction, which are two major critical positions in the reading and interpreting of Romantic poetry. The poetics of becoming and the creative process place the self in Coleridge s aesthetic and spiritual idealism in what I have called a constructiveRead MoreRdg/543 Dynamic Literacy Classroom Essay8655 Words   |  35 Pages1150L/160wcpm (level 9) | | Content Area Level:FAIRReading Comprehension: 13%Word Analysis: 71%Maze: 8 %FCAT Reading (level 1):(1) Vocabulary 20%(2) Reading Applications 33%(3) Literary Analysis 15%(4) Informational Text/Research Process 40% | FAIRRC 10%WA 60%Maze 8%No new FCAT data available | FAIRRC 19%WA 73%Maze 6%No new FCAT data available | FAIRRC 46%WA 77%Maze 23%Strand (1) 44%Strand (2) 39%Strand (3) 35%Strand (4) 55%(Level 2) | Reading: Lexile Measure according to FAIR (Winter 2011) ContentRead MoreMasquerading Colonial Innocence in Rudyard Kiplings Kim2940 Words   |  12 Pagesexperiences as a spy, his appealing association with the lama, and the ability and craftsmanship of Kiplings writing have all produced this daring and evocative if contentious novel to persevere as a minor classic of historical English literature. Analysis of Kim Kiplings selection of a teenage boy as the main character of his lengthiest novel openly gives a signals that he has an appointment with, and appreciation to, an current and still emerging custom of nineteenth-century Anglo-American childrensRead MoreThe Impact Of Beethoven On The Development Of The Symphony Until Mahler3555 Words   |  15 Pagesembraced the extra-musical programmatic ideas. Through an extension of Beethoven’s work in both of these strands, his legacy lived on and he was responsible to a large extent for the rapid development of the symphony. The first of Beethoven’s immense expansions of classical form is the Eroica Symphony. This was written at the start of Beethoven’s â€Å"Heroic Period† and, according to some musicologists, marks the beginning of the Romantic Era. Beethoven’s sudden and drastic stylistic change in this symphonyRead MoreThe Hours - Film Analysis12007 Words   |  49 Pageshis novel The Hours -- one of the titles Woolf considered for her novel in its early stages (Hussey 172)--he shows his indebtedness as a postmodernist writer to one of the principal texts of the modernist canon. In The Hours, all three narrative strands are in one way or the other connected to Mrs. Dalloway: the sections entitled Mrs. Woolf follow the author Virginia Woolf through a single day in 1923, the day she puts the first line of her new novel to paper; the sections under the heading ofRead MoreWho Goes with Fergus11452 Words   |  46 PagesWho Goes With Fergus This poem is about the dichotomy of the thinker and the actor. Yeats, in love with Maud Gonne, was the thinker, the courtly lover -- the one who would brood upon loves bitter mystery. Yeats was Mr. Nice Guy. Yet Yeats wanted to be the actor - the alpha male - the Fergus. Note the sexualized subtext that permeates the poem, who will pierce the deep woods woven shade? Who will drive with Fergus. Finally, we get the reasons to be the alpha male - the man of action, in theRead MoreEssay on The Gothic Genre and What it Entails6177 Words   |  25 Pagesis often said that one of the unifying features of Romanticism is its intentional political relevance. Much of the canonical Romantic literature is inspired or informed by socio-political events. We need only look at Blakes work or key poems by second generation Romantics like Shelleys Ode to the West Wind or The Mask of Anarchy to verify this. The same is true of Romantic Gothic which arose around that unique period in European history posthumously defined by the

Like some artists, Rodin was not an overnight success Essay Example For Students

Like some artists, Rodin was not an overnight success Essay Like some artists, Rodin was not an overnight success. Even though he was rejected numerous times from art schools because of his art style, he prevailed in the end. Rodin, like many artists, got their inspiration from other great and famous artists. In Rodins case, his inspiration came from Michelangelo. In Rodins more famous works, one can see the similarities between the two artists artwork. Rodins parents were not wealthy, therefore, he was not able to attend an art school of his choice. His father, however, did send him to Petite ÃÆ'†°cole, a training ground for commercial draftsman and practicienscutters and finishers of work in stone Hale 38. At the age of seventeen, Rodin won his first prize for a clay model and he came in second place for one of his drawings. His teachers at Petite ÃÆ'†°cole encouraged him to try for the Grande ÃÆ'†°cole des Beaux-Arts Hale 39. He applied, but was not accepted. Not giving up hope, Rodin applied two more times, but was rejected. Determined to make a living, he worked for a large commercial designer. It was there, that he created numerous objects with his hands; anything from masks of gods to cupids. This is where he began to see that he had a future in what he loved the most, art. Even though Rodin was an artist, his career did not take off so soon. When he was 22, his sister Maria died. He anguished so much over her death that he decided to leave his art. He quit everything and decided to enter the Order of the Fathers of the Very Holy Sacrament. While living in the monastery, Rodin confided in Father Eymard, and he was the one that told Rodin to continue sculpting and not to give up. Rodin eventually realized that religion was not his calling and once he had enough money saved up, he moved into his first studio. From that point on, he was fully committed to his artwork. Rodin said that it was so cold in his studio, he could not afford to have heat that he would wake up and see parts of his sculptures on the floor. Since I didnt have the money to have them cast, each day I lost precious time covering my clay with wet cloths. Despite that, at every turn I had accidents from the effects of the cold and heat. Entire sections detached themselvesà ¢Ã¢â€š ¬Ã¢â‚¬Å"heads, arms, knees, chunks of torso fell off; I found them in pieces on the tiles that covered the floor You could not believe what I lost in that way Hale 42. In 1864, Rodin created a masterpiece, something that would change his life forever. He created The Man with the Broken Nose, and with the new creation he said, It determined all my future work Hale 43. The new sculpture was not found to be worth anything after Rodin tried to enter it in the Salon. So, he took it back home and placed it in a corner for numerous years. One day, one of Rodins students saw the lonely bust and asked if he could borrow it to make copy. Rodin did not refuse and when the student, Jules Desbois took it to his classmates at the Grande ÃÆ'†°cole, they were astounded. All of Desboiss classmates stood around with amazement, all asking who created such an antique meaning that is was old, in a sense of not being used or displayed masterpiece. Desbois said, The man who made it, whose name is Rodin, failed three times to enter the school, and the work you take to be antique was refused by the Salon Hale 45. In 1866, Rose, his girlfriend, gave birth to a baby boy. He soon had a job with one of the best employers around, Carrier-Belleuse. There, he was a draftsman, molder, finisher and a caster. He eventually left because he had all the money that he claimed he needed. In 1870, he was called to serve in the National Guard, but was released because of his poor vision. By this time, there was no money and Rodin tried to call previous clients that could possibly want some decorating done. All ties were broken after he left the reputable company Carrier-Belleuse. After months without having any work, Rose left him and Rodin decided to join a partnership with another ex-employee of Carrier-Belleuse. Tim Storrier Biography EssayRodins Crouching Woman resembles many characteristics from Michelangelos Crouching Youth. The Crouching Woman, created between 1880-1882, looks as if she has eternal suffering. This is given away by the way her knees are bent, implying that she may be helpless, she wants to be pitied, or she is tired. Without the way the figure is positioned, from first impression, she looks like she is a tribal woman or a woman who works hard and is ready to give in. The tribal woman, uncontaminated by conventional sense of property but not necessarily virginal. Rodin may have been tempted for years to place a model in the pose of Michelangelos Crouching Youth Lampert 57-61. Lastly, squeezing of the breast suggests that she gave birth and is nursing a childLampert 205. The similarities between the two statues is easier to see than the differences. Both figures heads are tilted the same way. Both knees are bent and intertwined with her own arms; while one hand holds one foot. Both women have clear muscle definition, but the facial expression is just like the muscle definition, obvious that there are no emotions to show. Lastly, both sculptures are left in an un-sculptured stone for a base. Two of Rodins sculptures resemble many of Michelangelos pieces; Rodins Vase des Titans, resembles Michelangelos Igundi, Night and Day. The figures of the vase are positioned in the same way as well as posed in the same fashion. The man-like figures have the same muscle contortions that show a sense of muscle strain, just like the men in Michelangelos work. Rodin made a four seated Titans each measuring only 30cm, their back bent to support a jardiniere bowl. The poses are taken in essence from the contrapuntal figures of Michelangelos Igundi and his Night and Day Lampert 18. The sculpture of the Reclining Titans resembles the same works of Michelangelo, the Igundi, which is on the Sistine Chapel ceiling. Both sets of men have a sexual appeal because of the way that their legs are together and then apart. Once again, Michelangelos work can be seen in Rodins Faun and Child. The Faun and Child was designed in December 1882, and is almost a replica of Michelangelos sketch of the prophet Jechonius. Both adult figures have their heads looking back, as if both guardian and child are in danger. Secondly, the guardian is holding the child with his/her left arm. Lastly, it seems as though the children are either reaching or looking at something that they yearn for. There is not much information about how Michelangelo influenced Rodins work of the Bibi bust; which soon was the head for The Man with the Broken Nose. Rodin seems to be haunted by the Michelangelo when he produced the bust of Bibi as a kind of allegory of the endurance of mankind Hale 43. Lastly, The Three Shadows is one that I find very interesting. One says: the influence of Michelangelo on Rodins Adam is clear enough: not only is the contortion familiar but so too is the gesture of the right hand with pointing finger. The Shade, a variation of Adam, is considerably more original: the left arm hangs clear of the body, the spine becomes a deep groove and the neck is bent so radically that it forms a straight line with the shoulder giving the subject more of the denatured presence of the Shades who appeared in the tiny drawings Lampert 205-206. as a very talented artist, sculptor, and thinker. He was able to make people see things the way that he saw them, and even though it was tough getting started, he prevailed and was able to live happily; considering what a hard life he had. Rodin died in November 1917 and his common-law wife, Rose, died in February of 1917. Rodin died with having completed over 400 sculptures and 7,000 drawings. Finally, two of Rodins most famou s pieces of work were finally shown in the Salon in 1878, The Man with the Broken Nose and the Age of Bronze.

Niche Tourism Analysis

The main objectives of the essay are to define niche tourism, determine the major characteristics of niche tourism and how it differs from mass tourism.Advertising We will write a custom essay sample on Niche Tourism Analysis specifically for you for only $16.05 $11/page Learn More Moreover, the factors that have led to a rapid increase in the number of people participating in these forms of tourism, along with the different types of products available in niche tourism shall be explored. The future of niche tourism and its implications for private operators and destination managers have also been discussed. Niche tourism could be defined as special interest tourism that has been customised to meet the specific requirements of a particular market segment. Ali-Knight (24) adds that niche tourism is often carried out in a more authentic setting in order to meet the expectations of a smaller number of tourists. Moreover, niche tourism has its origin in speci al interest tourism (SIT) which is characterised by flexible delivery and particular market segmentation. The major characteristics of niche tourism borrows heavily from SIT and include customer tailored products, flexible delivery, are more specialized, and target a specific market segment (Kaufmann 1; Ali-Knight 24).Advertising Looking for essay on communications media? Let's see if we can help you! Get your first paper with 15% OFF Learn More On the other hand, mass tourism is one of the oldest forms of tourism which is a large scale form of tourism. Examples of mass tourism include pilgrimage, wildlife watching, cross country skiing, snowshoeing, and downhill telemarking as explained by Robison, Heitman and Dieke (6). From the discussion, the differences between niche and mass tourism can be explored in the context of quality, number of people involved, market segment, and quality. For example mass tourism is more quantity- based while niche tourism is quality-bas ed (Christou 2). While niche tourism is flexible and provides special and customized products to a small group of persons, mass tourism provides fixed programs to a large group of people/ tourists. The major products of niche tourism are wine, events and festivals, golf, film, heritage and genealogy, (Ali-Knight 40). Other products as provided by Robinson, Heitmann, and Dieke (9) include music, dance, sports, and other specific physical activities. Change in demand on tourism products, globalisation, availability of information, and increase in expectations of tourists have led to the rapid change from mass tourism to niche tourism. According to Robinson (9), these changes have resulted to a rapid increase in the numbers of people participating in these forms of tourism. Ali-Knight (24; 32) adds that the concept of niche marketing, global economic restructuring, emergence of a sophisticated, experienced consumer, alternative delivery, and flexibility are other factors which have enc ouraged the growth of niche tourism.Advertising We will write a custom essay sample on Niche Tourism Analysis specifically for you for only $16.05 $11/page Learn More From a personal perspective, niche forms of tourism will continue to grow in the future and replace mass tourism. This is because advancement in technology and continued changes in global economy will make the consumer more sophisticated and experienced. In return, the consumer demand for differentiated tourism products and flexible delivery will increase as noted by Ali-Knight (33). Moreover, we are living in a society that becoming increasingly more individualised, which means that niche tourism will continue to gain popularity as it provides modified products to small family or friends/ groups (Robinson et al. 9). The growth of niche tourism is bound to have implications for the private operators and destination managers in their efforts to capture and manage the impact of the specialis ed markets. For example, they will be required to shift from standardised and fixed service delivery to flexible delivery which may require extra funding. Lew (412) opines that as the growth increases, providers will be required to provide more choices, enhance predictability, and efficiency, and quality service required by consumers. Works Cited Ali-Knight, Jane 2011, The Role of Niche Tourism Products in Destination Development. PDF file. Web.Advertising Looking for essay on communications media? Let's see if we can help you! Get your first paper with 15% OFF Learn More Christou, Loizos. â€Å"Is it Possible to Combine Mass Tourism with Alternative Forms of Tourism: The Case of Spain, Greece, Slovenia and Croatia.† Journal of Business  Administration Online, (2012): 1-10. Print. Kaufmann, Hans Ruediger. Niche Tourism: Developing a Brand for the Irpinia Region. The University of Nicosia, 2012. Print. Lew, Allan. â€Å"Long Tail Tourism: New Geographies for Marketing Niche Tourism Products.† Journal of Travel Tourism Marketing, 25.3–4 (2008): 409-419. Print. Robinson, Peter, Sine, Heitmann and Peter Dieke. Research Themes for Tourism. London: UK, CAB International, 2011. Print. This essay on Niche Tourism Analysis was written and submitted by user Juliet E. to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Self-Motivation Essays

Self-Motivation Essays Self-Motivation Essay Self-Motivation Essay Self motivation is paramount to success in life. You must learn how to motivate yourself. In the present situation now, it is difficult to keep our spirits up and high, but knowing the right way to focus on the positive outlook in life, we will be able to achieve our dreams. We need to encourage ourselves to accept opportunity,because if we stop believing and trusting to what we can do in a particular situation, who else will? Why are we striving in life? What makes an individual work hard? I believe,each will respond,because we are all motivated with our goals in life,our aspirations,our dreams,all these give us the reason to stay and accept chances, for chances will always produce positive and fruitful life if it is done with trust,passion,encouragement,and willingness to improve and be successful. People think on the ways on how to make life better. One of these ways is through continued learning. If youre looking at adults going back to school whether in-campus or online,the most successful one are those who are highly motivated. They understand that education is a steppingstone to go far and reach the ladder of success. In order to be motivated,one must be dedicated to achieve the goals which are set as parameters in life. Life is short and there is no way we can fully enjoy it,only if it is taken care of and if we live our life in the best way we can and in the most productive way.

Media Ethics Essay Sample

Media Ethics Essay Sample Media Ethics Essay There are different kinds of media the press, entertainment and social media. Thus, there are different ethics for each one but almost similar to each other. In the past decades, journalists adhere to media ethics and have high standards but these days it appears that the press is overpowered by whoever has the bigger money or whoever is closest to the owners of the media company. Media these days are used to cover up other political or economic issues. They are used to inculcating certain ideas to the viewers. A person popular for something good can easily and quickly turn into an infamous one with how the media constantly show him to be. Sometimes real events about war and other crises are being diverted and covered up with other stories. That is how media are these days. Despite the lack of strict adherence to media ethics, here are the general ethics that they should have been following. In journalism, they follow the ethics of accurate and factual reporting, slander and libel considerations, and they have a harm limitation principle. The first one is of course expected. Media are expected to inform everyone else about something true. They need to give the actual facts and not make false truths or make assumptions. However these days, with a large number of media, some are not sticking this kind of morality. Many give false facts to people for the reasons to intrigue, grab attention, and sell. They should be publishing corrections to errors as soon as these mistakes are discovered. However today, when media commits mistakes, some even have the guts to deny their mishap and continue to stick on it. The second one is in line with the sensitivity of the first. Reporting facts is in a thin line with slandering someone especially if the event is leaning towards negativity. That is why it is very crucial for media to report as accurately as possible, so as to avoid libel a nd slander. The third one is to show right judgment and compassion to those that are affected by the event being reported. For example, the news is about a family man murdering a girl, then reporters should also be keen on the children and wife of the guy, and all others related to those involved. Just because they are reporting about them does not mean that they own them. Another form of media is entertainment. The ethics being upheld in this industry are the use of violence, sex, and use of strong language that is why there is always a categorization or rating of the films so to keep audiences aware whether they would be comfortable with it or not. Another one is product placement. Films should not be mainly just about promoting products, therefore they should accordingly use products in their productions, so it does not mainly become a commercial of it. There is also a discretion in presenting stereotypes and taboos in films, so not to encourage the wrong mindset to viewers. So, there is ethics that the media industry has to follow but with the freedom and rights being practiced by practically everyone these days, it has become challenging to keep both the journalists and the entertainers strictly adhering to the rules without modifying it too much to their own advantage.

Principles of Visual Communication Messages Essay - 1

Principles of Visual Communication Messages - Essay Example This paper highlights that the scene where the art was created is some distance away from where community members reside. They were trying to raise some money by converting the parking lot into a modern park with a good playground. It is one of the strongest examples of my artistic work that has been nicely decorated to capture almost all aspects of the modern artistic work. This is because of the color used, outward appearance and the shape of the art. Its outward image also gives more than one representation of what the artist was trying to explain unlike his first artistic work that showed only one meaning. There was no mixing of information and the features presented within the art are proportional to one another. This work is of high quality though seen by most people as cheap and low in quality. For this reason, most people consider his work as deceitful. In fact, this type of work is not devious since an experienced and knowledgeable individual does it. â€Å"Davis argues tha t he normally does his work in this manner in order to save time and avoid arrest by law enforcers†. Ethical perspective â€Å"The image produced has some ethics in it, for instance the car parking being changed to a park implies that there are some reasons for that; may be the surrounding has attractive environmental features where people may relax their minds by looking at them rather than being a parking lot.† The presence of a person within the work shows that it is meant for people and the way it is presented shows ethics since there is no disorderliness. It is also clear and of three-dimensional appearances and; therefore, the whole piece can be easily analyzed. It can also be photocopied easily and produce other similar pieces within a very short time unlike other art works which are in sketchy form .

Contract Law (Australia) Essay Example | Topics and Well Written Essays - 1000 words

Contract Law (Australia) - Essay Example has done or abstained from doing, or does or abstains from doing, or promises to do or abstain from doing something, such an act or abstinence or promise is called a consideration for the promise.† â€Å"A contract is an agreement enforceable at law made between two or more persons by which rights are acquired by one or more to acts or forbearance on the part of the other or others.† (Quoted in ReportBD.com) Since both the plaintiff and defendant maintained social relationship, the agreement between them was a bit social in nature, as there was no intention of either of the parties to enter into any legal remedies against non-compliance of either of the parties to the contract. There are two types of agreements i.e. Social agreements are the agreements which are just promises between two or more persons or parties, but do not enjoy the status of contract. For example one person invites another at his office to have dinner with him, but if he fails to host dinner, no legal remedy can be demanded, as it is social agreement in nature. Such promises do not bind the parties, to fulfil the promise, thus no legal rights between the parties are created, as in the case of Balfour and Balfour (1919) 2 KB 571: â€Å"When a husband failed to pay a promised allowance, the wife sued. The court announced the judgement in these words: "There are agreements between parties which do not result in contracts within the meaning of that term in our law. The ordinary example is where two parties agree to take a walk together (or) arrangements which are made between husband and wife. They are not contracts because the parties did not intend that they should be attended by legal consequences. Each house is a domain into which the Kings writ does not seek to run.† (Quoted in Duhaimes Canadian Contract Law Centre) On the other hand, there are some contracts, which are legal in nature, and the parties are bound to execute the promise and agreements. In case of not complying with which,

The methods used by Dickens Essay Example for Free

The methods used by Dickens Essay The conditions of the workhouse were awful and they didn’t care about the children much they didn’t give them allot of food. This is implied by ‘It was his ninth birthday†¦ he was kept in the cold cellar†¦ after a sound thrashing†¦ for atrociously presuming to be hungry’. This shows that on Oliver’s ninth birthday he was locked in the cupboard and was starved to death. The word ‘atrociously’ shows us that Mrs Mann was a Cruel and Wicked women. Dickens is using the technique sarcasm because to show that people were treated badly and they wanted children to die. This makes the reader think that children at that time where treated really badly and makes the reader feel sorry for them for what they are going through. Oliver was looked after by Mrs. Mann who wasn’t a good person because she didn’t look after the children properly, she didn’t feed them well. This is implied by ‘it’s very likely it will be troublesome. Give it a little gruel if it is . This quote shows us that Mrs. Mann didn’t care much about the children, she was spiteful and she couldn’t be bothered to look after the children properly, also she didn’t care if the child dies and also she’s a hypocrite. The words ‘troublesome and gruel ’ means if the child starts crying and gruel is a cheap porridge , this shows that if the child is crying just give them some gruel to make it shut up and the child won’t bother them again . Dickens is using the technique sarcasm because to show that children weren’t that important at that time. This makes a modern reader think that people didn’t care much about the child and makes the reader feel sorry for them. The conditions of the workhouse were very bad and dirty. This is implied ‘At last the got so wild and voracious with hunger†¦ He was afraid he might sometime happen to eat the boy who slept next to him. ’ This portrays that the conditions in the workhouse were terrible and filthy. The word â€Å"voracious â€Å"shows us that Oliver was really hungry, he didn’t get feed well. He is using the technique sarcasm because to show people how hungry y he was and that he could eat people next to him. As a reader, I feel extremely sorry for the children in the past because they didn’t get feed well and the people there were really hungry that they could eat another person and also people didn’t care about the children much but they should have cared and the children didn’t have a good life. The conditions of the workhouse were really bad because they make people cry and feel scared and make them feel uncomfortable. This is implied by ‘made him answer in a very low hesitating voice whereupon a gentleman in a white waistcoat said he was a fool. What capital way of raising spirits, putting him quite at ease. ’ This quote shows us that Oliver was scared of the men as it said he trembled and went on to answer in a low and hesitating voice. It also shows us that the gentleman are not nice to children they think that they don’t know anything . The word ‘trembled ‘shows us how frightened he was the fact that he trembles shows just how would approved to the board and how he was feeling inside. He is using the technique sarcasm because to show us how he was feeling, and how the gentleman treats the children there. I feel this is unacceptable because they are making the kid cry and also making them feel frightened for no reason and they shouldn’t be allowed to do that and also the children didn’t have anything good to wear except rags .

Inca Empire Essay -- essays research papers fc

We know from history many various civilizations. Civilizations like Sumerian (4000 BC), Egyptian (3000 BC), Minoan (2000 BC), and Babylonian (1700 BC). Later, the Greek civilization, throughout the Macedonian empire, ranged as far east as northern India and as far south and west as Egypt. Then Romans were the rulers of the whole area from Constantinopole, to Palestine and North Africa to Britain. After centuries, the Vikings, people from what is now Norway, Sweden, and Denmark, established colonies in northern France, Sicily, England, and Ireland. During the 13th century AD, Mongols created a vast empire in Central Asia and the Mongol Empire controlled the expanse of territory from the Ural mountains in Russia to the Pacific Ocean. The same period of time another great civilization, called Ottoman Turks, was taking over most of North Africa, the Middle East, and the Balkan Peninsula. In America, Incas were the rulers of the largest native empire. Near the end of the 14th century the Inca empire began to expand from its initial base in the Cuzco region of the southern Andes, mountains of South America. Incas’ expansion ended with the Spanish invasion led by Francisco Pizarro in 1532. The Incas were the greatest indigenous civilization of the Americas. Within 100 years they had build a powerful empire, stretching the entire length of the Andeas, at a distance of more than 5,500 km. It was probably the greatest empire of its time life anywhere in the world, if we imagine that they had built a road system that extended some 30,000 to 40,000 km, unrivaled until the invention of the automobile, they possessed great skills in medicine, and they had a fully controlled social, political, and economical organization, although they lacked basic concepts such as the written language, the wheel, the steel, and the horse. In common with other Andean cultures, the Incas left no written records. Their history and their culture are known chiefly from the oral traditions preserved through the generations by official â€Å"memmorizers† and from the written records composed from them after the Spanish conquest (Inca 375). The official language of the Inca Empire was the Quechua language. Eventhough the Spanish destroyed most Quechua cities and religious centers when they conquered the Inca Empire, many aspects of their way of life survive. There are about 10 million people in Per... ...of the Andes, and many thousands of tourists every year go there to see the impressive stone architecture the Incas erected among spectacular scenery. Because of records made by early Spanish and native chroniclers, we also know more about the Incas than about any earlier culture of the Andes. And, fortunately, through documentary research and archaeology, we continue to learn even more about the Incas and their achievements, such as their great road system, impressive architecture, elaborate ceremonies, and more. BIBLIOGRAPHY: â€Å"Inca Empire†. Microsoft Encarta Encyclopedia, 1999, ed. Pages: 1-12. â€Å"Quechua†. Microsoft Encarta Encyclopedia, 1999, ed. Pages: 1-3. â€Å"Inca†. Encyclopedia Britannica, 1984, Greek, ed. Pages: 375-380. Rosso, Francesco. â€Å"Inca Empire†. Histrory. Papyrus Press ed. Athens: Encyclopedia Britannica Educational Corporation. (1969): 119-133. Lost Civilizations. Incas: Lords of Gold and Glory. New Jersey: Time Life Books, 1992. â€Å"The Incas: A Pictorial Tribute To the Art & Culture of The Incas" - by a native of Ecuador. http://www.colourprep.com/jorge/incas/incas.htm. â€Å"Inca†. Broadcast November 24, 1997, 7:00-9:00 PM. Http://www.historychannel.com

“Fat Tax” brings Fat Benefits Essay

Junk food. Do any of us know the meaning of the term? Do the consequences of developing lethal diseases not concern us? Apparently, today’s society is well aware of what it is, (food with a low nutrition value and is usually processed or ready-prepared (Junk Food)) and what it can do, yet they prefer not to have truth repeatedly slapped in their face by the media. The way I see it, that’s exactly what these individuals are asking for. They say diets are productive, but it’s based off of self-encouragement which can only take you so far. According to an article composed by William Dietz, Obesity is a matter of personal responsibility. Poor dietary decisions cost individuals the expansion of their waist lines. What many do not realize is that as they continue to visit fast food restaurants for breakfast, lunch, or dinner, they develop an addiction. Sooner or later, they find themselves wrapped around junk food’s salty fingers and haven’t bothered to n otice that they no longer can see their toes standing upright. Higher taxes should be imposed on processed goods because it could lower death rates and medical bills that tie into obesity, encourage the consumption of healthy products, and educate American’s about adapting correct eating habits. Americans today are consuming 20% more calories than they did in the early 1980’s,† (â€Å"Would Imposing†¦Ã¢â‚¬  par. 3). Also, during that time period, only one third of American’s populace were identified as obese which is equivalent to 13%. However, over the past 25 years, America has exceeded to about 60% of the population being fat (Oliver par. 8). Due to the continuous establishments of fast food restaurants, Americans have noticed that their waist lines have expanded substantially. Hundreds of years ago, McDonald’s, Jack in the Box, Wendy’s, and Burger King were non-existant. With McDonald’s Big Mac meal containing approximately 1,300 calories, it’s no wonder America has been suffering an obesity epidemic. It’s because of these successful  companies that we have to pay for the over flowing stacks of health expenses they’ve created for us. Comparing Americans then with Americans now, you could literally see the difference without the need of any statistical information from surveys, documents, and whatnot. One of the many reasons why the government is taking this â€Å"fat tax† into consideration is due to the overwhelming figures of premature deaths and medical bills occuring across the nation. According to studies, officials are hoping that taxation on junk food could â€Å"†¦avert 2,600 deaths, 9,600 heart attacks, 240,000 new cases of diabetes every year,† (Chan par. 2). That’s not the end of it. These numbers are ascending as I we carry on with our normal daily lives. For all I know, 2013’s statistics for premature deaths due to obesity could escalate to 3,500! Almost every year, America’s government is burdened by the stunning $117 million in debt they have to pay because of people becoming diagnosed with multiple heart diseases thanks to the consumption of fast food. With that being said, the Centers of Disease Control (CDC) informed the public that too much of today’s society relies on the cheap and convenient take outs our restaurants provide us. They encounter at least 400,000 individuals with health problems, charging them almost $100 million a year (Lewis par. 4). For this reason, it is why unhealthy grubs are purchased regularly. If people were to choose between a $2 cheeseburger and a $10 salad wrap, what are the chances of them picking the $10 salad wrap? That’s what I thought. It’s disappointing knowing that profits made from fast foods are used to assist our nation’s debt. Why can’t the money derive from potent nourishments? Why do we allow the selling of unsalutary meals, knowing we are feeding them death munchies? In Addition, America has judgement skills that are completely frail and incompetent. Here we are placing exorbitant prices on healthy products when it should be the life-threatening comestibles that should be prohibited. A hand full of officials in the country have required several fast food restaurants to display â€Å"calorie-count labels† to drive individuals’ taste buds from convenience food. But even that won’t prevent obesity (Mozes par. 7). Nevertheless, even a simple a simple label couldn’t stop the hungry beasts of America from  gobbling down chunks of blubber. Due to these astonishing numbers, Americans are looking towards taxing junk food similarly to â€Å"sin taxes†. It’s a tax on harmful items (such as alcohol, tobacco, etc.) that could reduce its consumption. Officials have been pushing for states to insitute a â€Å"fat tax† and consider it as a â€Å"sin tax†. According to several smokers in New York, they discovered that paying a total of $14.50 for one pack of cigarette wasn’t worth their money. Some of them knew that complaining wouldn’t get them anywhere, so they eventually â€Å"ditched the dependency† (Sutherland par. 2). With the assistance of this sin tax, â€Å"smoking rates dropped by 12%,† (â€Å"Would Imposing†¦par. 3). This specifically proves to opponents that bomming junk food tariffs can depreciate premature death percentages and medical expenses as well. Obviously, pricey items attract less customers nowadays; so the higher the taxes, the lower the consumption. Plus, our government could distribute these taxes to health services and programs that illustrate the essence of corpulence. Also, whether the populace continues to ignore the government’s warning through tariffs, either way the tariff generated †¦$30 million in new revenue, tax records show. Basically if fast food customers wish to pursue their daily routine visiting McDonald’s, it’ll still bring the economy extra dough to support the country. Even if our main focus is to sever society’s tongue from higher cholestrol levels, we can only succor those who wish for assistance. Moreover, authorizing taxes on fast foods could subsidize the nutritional products that actually supply our physiques with the appropriate energy it naturally pines for. Knowing that the â€Å"†¦poorest in the country rely on cheap junk food,† (Lewis par. 5), automatically discloses that this necessitates more natural resources. However, in America it’s vise-versa. The more nutrition an item contains, the more you have to pay. With higher taxes on junk food, there would be no need for the federal to tax our fruits and vegetables. Society will eventually quit their whining and chase cheaper alternatives. Representatives throughout the country have â€Å"†¦calculated that an 18% tax  on junk food would result in a 56-calorie decline in total daily intake†¦along with significant reductions in the risks of most obesity-related chronic diseases,† (Fiore par. 12). Doctors have stressed that the recommended calorie consumed should be in the range of 2,000 calories. By the looks of it, American’s today are exceeding these limits. And they wonder why they are experiencing strokes, heart attacks, and becoming diagnosed with diabetes. Lastly, more health education could influence the population’s mindset about the need to eat sugary items. Media has played a huge role in advertising greasy items. Instead, we could use this strategy to discourage our customers from purchasing fast foods, stressing our concerns of obesity. Our targets would be the same audience that was exposed to fattening commercials. Raising awareness within our communities, and then our country is what the U.S. lacks today. It has been said that â€Å"You are what you eat,† but are any of us aware of exactly what we are putting in our mouths? They may display what supplies make that particular meal, but do they show how much butter they use to cook steaks? Apparently, the â€Å"U.S. Department of Agriculture says hamburgers have been growing from 1 ounce in 1957 to 6 ounces in 1997,† (Oliver par. 11). If 1997 was sixteen years ago, just imagine how hefty burgers are today? Notifying our customers about junk food should be our leaders’ priority. â€Å"It would be irresponsible not to try everything we can to save lives†¦People are dying everyday due to sugary products,† (Bloomberg qtd. in Heaton par. 5). I couldn’t agree more with Mayor Bloomberg of New York. He is probably the only official that wants to institute a fat tax to give back to the people he represents. American’s are self-centered, and their main focus is money. No one cares if they’re putting one’s life in jeoparady by creating harmful grubs. If one was to take a stand against these fast food companies, it’ll have to start with our leaders. On the other hand, controversies have made society equivocal about the implementation of taxation on packaged foods. As expected, citizens of America claim that the government is becoming too controling, and their freedom of choice is being stripped from them. While our officials’  intensions are to perpetuate the corpulence widespread, others feel provoked because they believe the government is trying to dictate their intellect (Lewis par. 3). Our leaders stress that taking care of the well-being of our internal organs should be our priority. However, the public refuses admit to the valuable advice they articulate. Many feel as if they were to say, Who are you to tell me what I can eat and not eat? It’s only fair that the people have the last say. After all, this country was established fighting For the people, by the people†¦ (Star Spangled Banner). On top of that, as stated in an article by Jen Kalaidis, tax also costs [the] country an estimated 1,300 jobs because employees would no longer be needed in food retail sectors. Although an collection of occupations would be lost, many tend to give in and develop the mindset of a pessimistic. As Alexander Graham Bell, (an eminent scientist, engineer, innovator, etc.), proclaimed, When one door closes, another door opens. The message he speaks of is about preserverence and circulating nothing but positive thought within your mind. American’s who fear losing their jobs should realize that plantation fields and factories will demand more and more employees once the fat tax is instituted. The fields will require more man power for labor work, and for manufacturing purposes as well. You will soon after notice that grocery markets will have job oppertunites. It’s actually a ripple effect, and once the economy is back to the way it was before the nation debt came about, the unemployement will be no more. Therefore, it is essential to communicate the outweighing benefits of a fat tax to the public now, before America begins to hit a downfall in the next five years. Junk food should not be outlawed, nor should it be cheap. If American’s want to continue this portliness evolvement, they can expect to see excessive aftermath in death rates. These unhealthy eats are about to rebuild our country’s values soon enough. However, with the assistance of this Twinkie Tax, I believe we could expect a tangible decline in America’s death progression and health expenses, a promotion of organic products, as well as more programs raising awareness of corpulence. Works Cited Chan, Amanda L. â€Å"Raising Junk Food Prices Could Spur People to Consume Less: Study.† The Huffington Post. The Huffington Post.com, 12 Dec. 2012. Web. 26 Apr. 2013. Dietz, William. â€Å"Obesity ProCon.org† Obesity ProCon.org. Search Engine Optimization, 19 Apr. 2013. Web. 26 Apr. 2013. Elder, Larry. â€Å"Just How Fat Are We?† WSJ: World Stream. WND Commentary, 1997-2013. Web. 26 Apr. 2013. Fiore, Kristina. â€Å"Junk Food Tax Could Improve Health.† ABC News. ABC News Network, 10 Mar. 2010. Web. 06 May 2013. Heaton, Richard. â€Å"NYC Soda Ban Overturned then Appealed.† Digital Journal (2013): n.pag. Print. â€Å"Junk Food.† Dictionary.com. Dictionary.com. n.d. Web.05 May 2013. Kalaidis, Jen. â€Å"Should the U.S. Adopt a Fat Tax?† The Week [New York] 25 Feb. 2013: n.p. Print. Lewis, Catherine. â€Å"The Junk Food Tax: How Much are We Willing to pay to get America Healthy?† Your Health Information Center. Insider’s Health, 2011. Web. 5 May 2013. â€Å"Medical Weight Loss Resources.† Top 10 Obesity-Related Diseases. American Heart Association, Centers for Disease Control, National Institutes of Health, 23 Apr. 2013. Web. 16 May 2013. Mozes, Alan. â€Å"The Fat Tax.† A Controversial Tool in War Against Obesity. (23 May 2005): 2-3 Print. Oliver, J. Eric. â€Å"A Big, Fat Problem.† Fat Politics: The Real Story Behind America’s Obesity Epidemic. Oxford: Oxford UP, 2006. 1-4. Print. Sutherland, Amber. â€Å"Smokers Huff & Puff Over New Cigarette Tax.† New York Post. New York. 3 July 2010: 1-2. Print â€Å"Would Imposing a High Tax on Fast Foods and other Unhealthy Foods Help Combat Obesity Issues in U.S.?† Debate.org. Centers for Disease Control & Prevention, 22 Nov. 2010. Web. 29 Apr. 2013.

Pride and Prejudice Essay

Consider the final resolution of the novel. Is the ending a fairy tale one (recall that fairy tales end with â€Å"and they lived happily ever after†)? How does the novel expand upon and complicate this ending? Does the ending play up the romance, or the social satire? What is the final message, which the novel leaves us with? Many fairy tales and love stories end with a marriage and a happy ending. In many ways, Pride and Prejudice did have a fairy tale ending. Seeing Elizabeth and Jane each getting married to the men they love at the conclusion of the novel, implies a fairy tale ending. On the other hand, neither Charlotte nor Lydia experience happy marriages. Although the novel displays romantic characteristics, I perceived Darcy’s actions in using his social status and fortune to help Lizy’s family, to make the novel seem somewhat of a satire. I would have to say that the final message of the novel is that the greatest happiness you can find in life is love. The story starts off showing that being loved back by the one you love is an impossible situation to achieve in real life. Even though Darcy, because he is handsome and rich, is rejected by Lizzie she later discovers that she did not realize she truly did love him. In the end, two of the main characters end up getting married and living happily ever after. In addition, two not so important characters end up with an unhappy marriage. This novel shows that in life there might not always be a happy ending but is not a catch-22!

How to break news to employees, Training Journal - Emphasis

How to break news to employees, Training Journal How to break news to employees, Training Journal Whether the message is good, bad or indifferent; now is no time for silence, says Rob Ashton. During the ancient wars, if you wanted to deliver a message you hired a messenger to hand over the scroll personally. But approaching enemy lines to pass on bad news was a high-risk job. The bearer of bad tidings is never popular and it wasnt unusual for the messenger to be killed out of rage. Delivering any news can be fraught with difficulties because you never know how the receivers will interpret it. But imparting news of recession-prompted change can place you right in the firing line. With the credit crunch still in full swing, workers have got used to a daily, media-delivered diet of layoffs, profit freefalls and horror stories of homeless executives living out of their briefcases. A climate of fear has spread throughout the business world. And many people have adopted the mantra that change is, quite literally, the enemy. But failing to update your team is a costly strategy. Employees are likely to become demotivated if they feel theyre out of the corporate loop. If a team cant turn to management when times get tough, they quickly begin to wonder if anyone is at the helm. The uncertainty may cause the best employees to submit their CVs to rival firms while others ride out the storm, vowing to jump ship once the outlook improves. The Association of Communicators in Business (CiB) have echoed this sentiment. They warned that organisations should redouble their internal communications efforts during uncertain economic times rather than putting them on the backburner. Broaching sensitive topics is never easy. But understanding your colleagues is to key to communicating effectively with them. Never be afraid to address the real issues, but communicate them in a style and manner that they will positively respond to. Whether the news is good, bad or indifferent, its got to be shared. Creating a culture of open communication, free of management speak, can make all the difference to company morale. Studies have shown that companies with high employee engagement levels have better financial performance. So, having an effective strategy for breaking news makes it more likely that youll emerge from the recession without nursing a lengthy corporate hangover. Communicating change Whatever industry you work in, the model for communicating change is the same. As soon as you know information, pass it on. Dont wait until you have every detail or your silence may breed distrust. And never communicate any information externally before youve told staff. Follow the six steps below to ensure that you are communicating strategically. 1) Explain the new direction In changing economic times, business goals have to be revised. Explain the direct impact of the recession on your industry and organisation and say what the firm will need to do to weather the storm. 2) Be honest and open Tell people about job or budget cuts as soon as possible, along with reasons and timescales. Having this open communication means that you need never worry about what youre telling people. 3) Create a vision Dont sugar-coat your message but paint a positive picture of the changes you are proposing. Be crystal clear about your message and its implications. 4) Keep communicating Keep up the information flow and make sure its two-way. Move quickly to correct any inaccurate information and make sure staff members fully understand the direction, vision and benefits of the news you are delivering. 5) Love the word change Energise the management team to make the word change the most positive word in the company. Explain to them the benefits of any changes and always associate positive emotional words with any changes. Constantly remind employees that change is not a one-off exercise. 6) Repeat the steps Changes will keep happening so repeat the steps as soon as any new information becomes available. Once people expect change, its a lot easier for them to deal with. The write way With up to 70 per cent of workplace communication taking place through writing, honing your writing skills can help you to break news with far more ease. By choosing your words wisely, you can help to calm your readers and energise them to embrace change. The first rule is to put people first. Remember that people act and react according to their own self-interest. So communicate news in terms of what employees want or what would benefit them, rather than focusing on the benefits to the organisation. Win over your readers by giving them information in the way they like to read it. For instance, you can still use your internal newsletter to explain the ins and outs of your corporate restructure, but make sure its format and style is appropriate to its readership. For example, if you know that the favourite magazines that your staff read are glossy celebrity weeklies such as Heat and Hello, you might want to create a question and answer type article or one that presents the information in bite size chunks. Information is much easier to swallow when its broken up. Just make sure that it still provides staff with the whole picture. Think of creative, interactive ways to communicate your news. The BBC internal communications team, for instance, uses Wikis. These two-way websites mean that as well as reading the content, employees can edit it and attach their own files. In addition, blogs and internet forums are a great way to share information. But if you feel a good old-fashioned report will say it best, make sure you include all of your recommendations or most important information at the beginning. No-one wants to wade through the corporate equivalent of War and Peace to get to the important stuff. Make sure that you translate information so that it is free from corporate speak. Leave phrases such as blue sky thinking and picking the low-hanging fruit well alone. Create rapport with your readers by using no-nonsense words and phrases that do exactly what they say on the tin. Simple is best. And dont be afraid to show your personality or inject life into your written communication. Your readers will thank you for it. Three steps to effective writing Before you put pen to paper, use the checklist below: Keep it short You may think that open, flowing communication needs to be wordy, but the opposite is true. Avoid flowery phrases and practise writing your sentences in the shortest, snappiest way. Aim for an average length of 15-20 words and stick to the rule of one sentence, one idea. Use active language Write We invested 130,000 in staff development last year, rather than last year an investment of 130,000 was made in staff development. The second version is livelier and easier to read because it says who before what. It also makes sure the company gets credit for the good things. Use verbs instead of nouns Make sentences shorter and easier to understand by choosing verbs over nouns We will consider proposals submitted by the end of July has more punch to it than proposals submitted by the end of July will be given consideration to. Email etiquette Email is best reserved for following up on face-to-face communication. If what you say affects peoples lives and jobs, allow a two-way dialogue to take place. Its also all too easy to send an email to the wrong person or dash off an abrupt angry message. If you wouldnt write it on a postcard, dont send it via email. Your email could end up being circulated far and wide with negative consequences. If youre just expanding on an already open dialogue, by all means send emails. But think carefully about what you put in the email subject box. Take inspiration from newspaper and magazine headlines and choose your words carefully. For instance, Now is no time for silence is much more effective than This months communication update. You can monitor who opens the emails, but its more difficult to measure how engaged people are with the contents. By honing your writing skills, you stand a better chance of connecting with your staff. 2009 Emphasis Training Limited, first British serial rights offered

3 Sentences That Confuse Instead of Explain

3 Sentences That Confuse Instead of Explain 3 Sentences That Confuse Instead of Explain 3 Sentences That Confuse Instead of Explain By Mark Nichol In each of the following sentences, the manner in which the statement is constructed hinders rather than aids comprehension. In each example, discussion describes the problem, and a revision provides a solution. 1. To what extent are you expected to know your customers, a term that refers to identifying and validating client identity? â€Å"Know your customers† is referenced in this sentence as a concept, not as a term for a concept, so the definition of the implied term should be set off as an entirely distinct parenthetical (perhaps even defined in a footnote): â€Å"To what extent are you expected to know your customers? (The phrase ‘know your customer’ refers to identifying and validating client identity.)† Alternatively, to avoid the issue, revise to something like â€Å"To what extent are you expected to adhere to the know-your-customer principle, which pertains to identifying and validating client identity?† 2. Supervising flight operations in the control car or gondola, Pruss ordered the Hindenburg back down the Jersey Shore coastline. The location of the person supervising flight operations is described as â€Å"the control car or gondola,† but there are two problems with this description. First, the phrase includes two alternate names for a single location, but it is incorrectly uninterrupted by parenthetical punctuation, suggesting that the entire phrase represents a single term. Second, why use the more familiar term followed by a more technical one? Doing so in that order renders the latter superfluous. Better to introduce the less well-known term, followed by the first term as a helpful parenthetical gloss: â€Å"Supervising flight operations in the gondola, or control car, Pruss ordered the Hindenburg back down the Jersey Shore coastline.† 3. The EPA’s regulatory reform task force’s pending 30-day public comment period is intended to gather such input. Avoid stacking two possessive constructions in sequence. Here, the first possessive can easily be converted to an adjective: â€Å"The EPA regulatory reform task force’s pending 30-day public comment period is intended to gather such input.† Better yet, however, reorder the sentence to eliminate one apostrophized term: â€Å"The pending 30-day public comment period established by the EPA’s regulatory reform task force is intended to gather such input.† Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Style category, check our popular posts, or choose a related post below:75 Contronyms (Words with Contradictory Meanings)8 Writing Tips for BeginnersMay Have vs. Might Have

Money and banking Assignment Example | Topics and Well Written Essays - 1000 words

Money and banking - Assignment Example In this context, Commerce National Bank reports interest-sensitive assets of $870 million and interest-sensitive liabilities of $625 million during the coming month. This implies that Commerce National Bank is an asset sensitive one. Since Commercial National Bank is asset sensitive, if interest rates rise, the bank will definitely enjoy a net interest margin. The bank’s productivity on interest income and earning interest will raise its basis point for basis point in line with the market. If the rates fall, it will have its net interest margin compressed. Securitization Securitization of assets refers to the process of collecting various sorts of debts such as car loans, mortgages, or credit card debts and packaging them as bonds, collateralized mortgage obligations, or as pass-through securities. They are then sold to investors. This process can consist of any type of financial assets and it is aimed at reinforcing liquidity in the marketplace. It is also vital for smaller i nvestors to buy shares in a more complex pool. The most amenable assets used in the securitization process include equipment, trucks, automobiles, home equity loans, recreational vehicles, and credit cards. Alternatively, asset-backed deals especially for exotic assets may include: consumer loans, computer leases, time shares, trade receivables, and small commercial loans. Securitization offers numerous benefits to investors, purchasers, and financial institutions. It provides financial lending institutions with a technique to remove assets from their balance sheets, thus raising the pool of obtainable capital to be lent out. In addition, lending institutions are given a chance to utilize their assets to get funds, and most specifically, replacing the lower-yielding assets with higher-yielding ones. From the lending institutions and the regulator’s perspectives, there are some risks associated with the securitization process. This may involve such risks as banks using the bes t quality assets in the procedure, which implies that the remaining portfolio may be more dangerous averagely. This will lead to an increase in the lending institution’s capital requirements. Banks and other lending institutions choose to do this because investment activities balance the benefits that loans offer. In overall, investments demonstrate less credit risks as compared to loans, as well as permitting lending institutions to expand to various places that loans cannot allow. Investment securities also give extra liquid reserves wherever more money is required, help banks to reduce their contact with huge taxes, serve as a prevaricate against losses as a result of the evolving interest rates, and offer collateral as needed by the regulations. There are prepayment and interest rate risks associated with securitized assets. This happens when borrowers pay off or default particular loans in the securitized-asset pool prematurely. The reason behind this may be due to the f all of interest and the substitution of old loans at lower loan rates. Prepayment risk may noticeably lower the security values backed by such loans and alter their appropriate maturities. Further, the considerable drawbacks in these investments such as declining in their market values as the principal assets may lead to increase in default rates. Liquidity Total assets Sales of bank assets are projected to be $18 million Total

Learning to read and write Essay Example | Topics and Well Written Essays - 500 words

Learning to read and write - Essay Example The desire to read and learn how to write was also a primary factor in Douglass’s life. His whole life in Master Hugh’s family was spent conflicting with anyone who stood in the path of his desire to read and write. As a matter of fact, Douglass knew the effects of learning to read and write after seeing the changes in his mistress’s actions. The mistress changed from the tender-hearted, pious woman into a tiger-like fierce person who was more violent in her oppositions to the slaves than her husband (Douglas 1). The stories by Rodriguez and Douglass illustrate that education and the ability to learn and write were the only measures as stressed by the people around them to improve their lives. The world viewed education as the primary factor that could change the life of an individual. The master in Douglass’s case opposed the desire to educate the slaves and influenced the wife to do the same because they never considered it efficient to train a slave. Through education, the slaves would develop a sense of worthiness that would be damaging to the masters. The masters knew the power of learning to read and write and the consequences they would face had the slaves managed to do so. Douglas seemed to have a strong affinity to books and preferred facing the consequences than avoiding reading a book. He seemed to have an idea that books would be the key to his salvation. However, Douglas and Rodriguez failed to understand the adverse effects their actions would cause to their life. They failed to realise that there are two sides to every coin and that what has the power to make one free had the ability to blind and destroy them. Reading and writing abilities seemed to be the key to their success. However, soon after achieving their desires, they realized that they had achieved totally different results from what they expected. Douglas realized that he had been dreaming for most of his life and the ability to not understand the

Creative writing skills used by Silvia Plath in her work Essay

Creative writing skills used by Silvia Plath in her work - Essay Example From then, she exuded creativity that she blended with her writing skills, a rare gift she maximizes that gave forth the coveted write-ups that still flood the literary arena to date. However, her early and entire life is blanketed by sorrow and misery. A psychological problem eventually compels her to commit suicide. This essay will tackle some of the skills she managed to use as a writer in the process of doing her work. The bell- jar, one of Plath’s novel to a large extent is autobiographical. The tribulations that Plath goes through in life are chronologies reflected in this novel. By tactfully changing the identity of the characters and places in the novel, she skillfully takes care of the message she wanted to pass across as it unfolded. Her creativity and Witt comes out very clearly in the manner in which she uses Ester, the protagonist in the story to speak about herself indirectly (Karen 130). In her story, Ester becomes mentally ill after going through a thorny life. This compelled her to commit suicide when she sees no hope a head of her. .We are not surprised later, when Plath commits suicide because of the twin reasons that are similar to those that pushed Ester to cut short her life. We therefore conclude that, Plath wrote her life in the novel and she was able to lead her readers to knowing the reasons she finally took her life. In addition, the novel contains many people and events in Plaths’ real life all being a product of her fiction. ... She writes this poem as the only way of â€Å"vomiting† the bad past encounters her life had just gone through. She used a third party narration to distance herself to avoid being associated to the circumstance that had unfolded (Rebecca79). Plath portrays herself as strong-hearted and ready to bury the bygones of her life and move on. She uses poetry as the only mouthpiece to pour her personal issues without the slightest fear and in the process, alleviate her emotions. The tone she used in this poem is reminiscent of her depressive episodes and indeed, Plath takes her audience in her poem through her the painful wounds in life. The aggressive tone she used in the short stanzas of her the poem â€Å"Mystic† leaves the readers with feelings of physical pain as they read her poem â€Å"Mystic†, which is climaxed by the wise use of imagery, like hooks that are sharp and a stinging kiss makes the readers traumatized. Plaths’ selective use of rhetorical questi ons, â€Å"Where is remedy† is intentional, as she inwardly knows the answer is death (Edward 116). Plath also uses satire in her poem to mirror the rot in the society. Plath’s poem â€Å"The applicant,† which is a complete satire surrounding marriage and domestic- related issues. She carefully uses dramatic monologue and third person narration as a powerful tool in manipulating language and in this regard, critically exposes events bedeviling women in the society. Plath’s two poems â€Å"Ariel† and â€Å"Daddy† are autobiography in nature. She intentionally used details of her everyday life as a raw material for her art. She skillfully twisted real references and images within her footsteps in writing her poems. This created an avenue for her fans to

Literature Review About Meter Reading Techniques Computer Science Essay

Literature Review About Meter Reading Techniques Computer Science Essay In this chapter we will explore more about how meter reading is done, the different type of techniques that exist to read meters, and automatic meter reading; specially the use of Bluetooth technology for automatic meter reading. A world wide view will be explored before we look to the context of Mauritius. Meters A meter is a device that can detects and displays the exact quantity of an element, substance or any quantifiable matter, may it be electrons, water, gas, glucose and many others. There are many uses of meters and in many different sectors of our world. For example, in health sector; meters are used to measure the level of glucose in the blood, to measure pulse rate, and many others. The utility sector, like gas, water or electricity companies, uses a very large numbers of meters. These companies have to monitor the usage of the resources used by their customers so that they can be charged for the amount they have used. There are also other meters like: gauss meters, geomagnetic meters, microwave meters, and many more. As we have seen, there are many sectors in which meters are being used; we cannot focus our attention in all of them. So, we will concentrate our effort in the utility sector, more specifically the one for electricity companies. Why this choice? Because Energy sector is a driving force in our world and that many developments and advances are thanks to electricity. So from here on we will focus our attention on that specific domain. Types of meters There are many types of meters depending on the area of use. The main types of electric meters are: Electromechanical Induction Meter (Standard Meter): It is a meter which counts the number of turns an aluminium disc does. The amount of electricity used is directly proportional to the number of revolutions of the aluminium disc. The electricity is measured in kilowatt-hours and the rate of charge remains constant all over the day. These types of meters are commonly used on single phase alternating current supply. Electronic Meters: These meters have an electronic display and make use of wireless technologies like Bluetooth, GSM and GPRS to transfer information about electrical consumption. They have inbuilt automatic sensors which helps to detect electrical energy theft or meter tampering. Prepaid meters: are like the standard meters; the only difference is that, instead getting a bill at the end of the month, it is a pay as you use service. I.e. the consumer pays in advance for the electricity consumption. Smart meter: These meters record the amount of electricity consumption for a certain period of time. The recorded data is then sent to the utility company for monitoring and billing purposes. Smart meters can transfer data from and to the meter, i.e. it is a two way communication. Meter reading Electric meters measure electricity mostly in kilowatt hour (kWh). One kilowatt hour is equal to the amount of energy used by a load of one kilowatt over a period of one hour, or 3,600,000 joules. The meter reading process is done periodically, so that consumers can be billed for that period of time. There are different methods used by different companies for metering. There are two ways that can be identified. Namely: the traditional way and new techniques. The traditional way, which uses the standard meter, can be described as: The meter reader goes to the consumers place. There, the meter reader reads the current value on the meter and note it down on the bill for the previous electricity consumption period. The bill is then given to the consumer. The meter reader will then enter the current value in the companys system, so that the consumer can be billed for that current period. The new techniques, which uses, electronic and smart meter are as follows: The meter reader makes use of new technologies to read the meter value, and meters have an electronic display. There are many different new techniques used for meter reading, and they will be further elaborated below. Automatic meter reading (AMR) Automatic meter reading (AMR), is the technology where data about consumption and the status of the meter device is collected automatically. The data is sent to a central database for it to be analysed and billing purpose. Meters for water, gas, and electricity can use the AMR technique. With the uses of AMR, there can be one way or two-way communication. In the one way communication, query is done only to know the reading value from the meter. Whereas in the two way communication; functions can also be implemented to the meter. Techniques for automatic meter reading There are several techniques for automatic meter reading; some of them are listed below. Touch Technology In the touch technology, a meter reader have a device, it may be a handheld computer or specialised data collection device. When the meter reader in close range to the meter; the latter press a button. A signal is sent firm the device to the meter and the reading of the meter is saved on the device. That saved data is downloaded to a data collection computer for billing purpose. This technique is also referred as on-site AMR, as the meter reader needs to go on site to read the meter reading. Radio Frequency Network As its name suggest, the network uses radio wave to communicate with the meters. There are automatic reading systems which uses the radio based technology such Wi-Fi, ZigBee, Bluetooth and many others. Some of them are listed below. Handheld: a meter reader collects meter reading from meters which support AMR system. The meter reader carries a portable computer with a radio frequency receiver and transceiver which reads the meter readings value. [2] Mobile: it is also referred to as drive-by is a technique where the meter reading device is installed in a vehicle. The meter reader needs only to drive the vehicle along the path where the meters are found and the meter reading value is read automatically by the device installed in the vehicle. [2] Fixed network: it is a method where there is a network which is installed permanently to read meter reading. The network consists of many repeaters, collectors and a lot of other equipments so that values read are transferred to a central database. This method does not need the intervention of any human to read the metering value. Some time a hybrid AMR system is implemented so that when the fixed network goes down, the mobile system come into action. [2] Assessing the traditional meter reading and AMR The advantage and disadvantage of both traditional meter reading and AMR techniques are listed in the table below. Traditional Meter Reading Advantage Disadvantage Creation of job, as more people are needed to perform meter reading Social contact with consumers There can be error when reading the value. Difficult to detect fraud on meters. Some people consider the meter reader as an intruder in their privacy. Security of the person performing the reading the person may be attacked by dogs Table 2à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ1: Traditional Meter Reading Automatic meter reading Advantage Disadvantage Enable theft detection. More accurate meter reading. Reduce operating cost. There is no need to enter consumers property (except for exceptional cases). If the system is down, billing will be affected. The use of radio waves can be a source of concern to a minority of people Table 2à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ2: AMR Existing system using Automatic Meter reading There are many AMR systems implemented in many in different countries and using many of the different techniques listed above. Some of the existing AMR systems are listed: New Mexico Gas Company is using the AMR service. This has greatly helped to improve the working of the company. [4] The Ontario government introduced legislation on Nov. 3, 2005 to start the process of getting smart meters into every home and small business in the province by 2010. [5] Meridian Energy has started replacing traditional electricity meters with new smart electricity meters which will set a new benchmark for electricity retailing in New Zealand [6] Existing system of Bluetooth enable meter reading There are some companies which are using Bluetooth enabled meter for the reading of their meters, and there are some supplies of Bluetooth enabled meters. The topic is further developed below. Existing system Cambridge Consultants has delivered a prototype design of a Bluetooth-based radio module to the leading utility metering company, Actaris. Based on a single-chip Bluetooth device, the module provides new opportunities to drive down the cost of remote metering, allowing meters to be wireless-enabled at very low cost and opening the door to high-integrity consumer-activated schemes. Consumers with Bluetooth mobile phones, laptops or PDAs would have the option of taking meter readings themselves and communicating them to the utility company over the internet or GSM. [7] Bluetooth enabled meters suppliers There are many suppliers of Bluetooth enabled meters. Some of the suppliers are listed below. Landis+Gyr, is a company which design and manufactures electricity meters. This company have also design a Bluetooth reading system where they can read meters using Bluetooth. [8] Figure 2à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ1: Bluetooth reader [8] Metex Corporation limited is a company which is manufacture meter readers, and the company has meters with Bluetooth technology. These meters can be used in an AMR system. [9] Current situation in Mauritius In Mauritius, we have the Central Electricity Board (CEB), Central Water Authority (CWA) and Waste Water Authority (WMA) as the main utilities companies. All these utilities companies are using the traditional way for their billing purposes. .I.e. a meter reader will go home by home and read their respective standard meter. The CEB is doing research on how to implement automatic meter reading and they have some electronic meters for testing purposes. CEB has also intention to implement prepaid meters. The AMR system on which CEB is experimenting consist of meter which has a modem. Then a communication is set with the modem and concerned data is read. That data is used for the billing purpose. As mentioned, the system is still at a testing phase, so a lot are still need to be done. To be able to implement AMR system all standard meters need to be changed to AMR supported meters, and meter readers need to be trained to be able to use the new system. Bluetooth Technology What is  Bluetooth? Bluetooth  is a wireless technology for short range communications which was developed to replace the cables connecting devices, may it be fixed or portable ones. Such devices are; mobile phones, printers, cameras, desktop computer, and many others. The Bluetooth  technology is a low power, low cost and maintains high levels of security. Bluetooth technology operates in the unlicensed industrial, scientific and medical (ISM) band at 2.4 to 2.485 GHz, using a spread spectrum, frequency hopping, full-duplex signal at a nominal rate of 1600 hops/sec. [10] The Bluetooth Special Interest Group (SIG), an organization of several companies work together to maintain and develop the Bluetooth technology. [10] The name Bluetooth comes from Danish King Harold Bluetooth. He was influential in uniting warring factions in parts of what is now Norway, Sweden and Denmark. [11] Bluetooth technology can withstand interference from wireless technologies which uses the 2.4 GHz spectrum. Adaptive frequency hopping (AFH) of Bluetooth technology detects other devices in the spectrum and avoid the frequency they are using. [11] According to Martin Reynolds, an analyst with Gartner Groups Dataquest, The thing about Bluetooth is that it really will ship in the billions of units once it gains momentum. Its really a multibillion-dollar market. [12] Bluetooth Logo Figure 2à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ2: Bluetooth logo [13] Bluetooth range Bluetooth radio waves use certain amount of energy and can goes up to a maximum of certain diameter. The table below show Bluetooth class and its limit up to where it can go. Class Power use (mW) Range (approximate) in meters 1 100 100 2 2.5 10 3 1 1 Table 2à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ3: Bluetooth class range BLUETOOTH Network There are two type of network: Piconet: is made up of one master and one or more slaves but only up to a maximum of seven active slaves at a time. The device initiating the connection automatically becomes the master and is the master of the piconet. Slaves may not communicate directly with each other; they can only communicate with the master and transfer data when they are granted transmission time by the latter. Slaves synchronize their frequency hopping with the master using the masters clock and Bluetooth address. Figure 2à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ3: Typical piconet [14] Scatternet: Multiple piconets with overlapping coverage areas form a scatternet. Each piconet may have only one master, but slaves may participate in different piconets on a time-division multiplex basis. A device may be a master in one piconet and a slave in another or a slave in more than one piconet. Figure 2à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ4: Typical scatternet [15] Bluetooth protocol stacks The Bluetooth protocol stack allows Bluetooth devices from different manufactures to work with one another. Some of Bluetooth protocol stacks   LMP (Link Management Protocol); configure and control links to other devices.   L2CAP (Logical Link Control Adaptation Protocol); links upper layer protocols over the Baseband and the passing on of quality of service information. RFCOMM (Cable replacement protocol): protocol provides emulation of serial ports over the L2CAP protocol.   Service Discovery Protocol; provide a way for discovering services provided by or available through a Bluetooth device. It also allows applications to know about the characteristics of the services which are available.   HCI (Host/Controller Interface); access the hardware status and control register. It also provides a command interface to the Link Manager and Baseband Link Controller. Bluetooth radio is a transceiver which transmits and receives modulated Bluetooth radio waves for the devices. Figure 2à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ5: Bluetooth protocol stacks [15] Bluetooth profiles Bluetooth profiles help two devices which have the same profile to communicate with each other. Each Bluetooth device must support at least one profile. There are a wide range of Bluetooth profiles that explain many different types of applications. Generic Access Profile (GAP): Provides the basis Bluetooth functionality for all profiles. Some of the functionalities are like setting up L2CAP links, handling security modes and discoverable modes. Serial Port Profile (SPP): Provides serial port (RS-232) emulation based on the RFCOMM part of the Bluetooth stack. Dial Up Networking Profile (DUNP): Defines how to a Bluetooth device can be used as a Dial Up Networking gateway FAX Profile: Defines how a Bluetooth device can be used as a FAX gateway Headset Profile: Defines what is required to transfer audio e.g. a wireless Bluetooth headset LAN Access Point Profile: Defines how a Bluetooth device can be used as a LAN access point Generic Object Exchange Profile (GOEP): Provides support for the OBjext EXchange (OBEX) protocol over Bluetooth links Object Push Profile: Defines how to exchange vCard and vCalendar objects, based on the GOEP File Transfer Profile: Defines functionality of how to navigate through folders and copying, deleting or creating a file or folder on a Bluetooth device, based on the GOEP. Figure 2à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ6 : Bluetooth Profiles [16] THE ADVANTAGES OF BLUETOOTH Short transmission range up to a maximum of 100 meters with class 1. Low Power: Bluetooth takes relatively low power, thus it is suitable for devices with restricted battery capacity. Interoperability: as it have standardised protocols. Robustness: capable of operating in an environment strongly where there are many other radio waves Technologies for developing the system There are many phase for the development of a system and there are many tools available for their development. Two categories can be identified for a system; hardware and software. The hardware part is the part that can be hold by hands and move if it is portable. The software part can be seen as the one who make the hardware works correctly. Without the software, the hardware cannot be used fully. Programming language There are a series of programming languages that are available to programmers to code systems. Each programming language has an area of application where it is better. Some of the programming languages are listed below. Java Java is cross platform and GNU General Public License  programming language. Java is an object-oriented, class-based, general-purpose, and concurrent language. It is intended to let application developers write once, run anywhere. Java programming languages is used in many systems ranging from applications software to web applications. Java can be use for Bluetooth programming. Java Communication Process (JCP) developed JSR 82, Java API for Bluetooth, so that Bluetooth enabled devices can be code easily using J2ME. Integrated development environment (IDE) help to code with java, some examples are: NetBeans The NetBeans IDE is written in Java and needs JVM run. It can run on different operating system like Windows, Mac OS, Linux, and Solaris. A JDK is required for the functionality of Java development. Netbeans also has a GUI design tool that help developers to design GUIs. Eclipse Eclipse was mostly written in java and can be used to develop java application. There are a lot of plug-in which helps to for development. J2ME J2ME is Java platform used to code embedded devices, like mobile phones. Java ME source code is licensed under the GNU General Public License. J2ME can be use to code systems with wireless connection. C programming language C is a general-purpose computer programming language that can run on many platforms. C can be use for developing portable application software. Python Python is a multi-paradigm programming language and it is cross platform, i.e. it can work on different operation systems. Python can be use for Bluetooth programming. Visual Basic.Net (VB.Net) Visual basic is implemented on .Net framework. VB.Net was designed by Microsoft and it is an object oriented language. Relational Database Management System (RDMS) Some of RDMS are listed below: MySQL MySQL is a relational database management system which is released under the GNU General Public License. It offers multi-user access to databases and it is cross platform software. PostgreSQL PostgreSQL is an object-relational database management system (ORDBMS) and it is released under PostgreSQL License. Thus it can be modified and distributed in any form desired. Web Server A Web server is responsible to process users request and reply back. The replies are mainly HyperText Markup Language (HTML) documents. Web servers are mainly used t host Web sites. Apache HTTP Server Apache HTTP Server is a Web server which is licensed under Apache License 2.0, which means that it is an open source HTTP server. It is platform independent, highly secure and efficient. Internet Information Server (IIS) IIS was created and is owned by Microsoft. There is need to buy it license to use it. Web Development Tools There are many server side scripting languages that are used. Some of them are listed below: PHP PHP (Hypertext Preprocessor) is a general-purpose scripting language that was designed for web development so as to have dynamic web pages. PHP can work on most servers and operating system. ASP.NET ASP.NET allows programmers to build dynamic web pages, web services and web application. It is a web application framework developed and marketed by Microsoft. Hardware Some of the hardware that can be used is listed below. Mobile phone Mobiles phones have become a common electronic device. It offers many options than just make call and send messages. Nowadays we can access the Internet via mobile phones, and there are many applications that where developed on mobile phone. New generation mobile phones are equipped with camera and Bluetooth. Laptop/ Computers Computer is like the tool that enables programmers to work. All most all programming languages, not to say all, can work on computers. They are also equipped with many wireless devices like Wi-Fi and Bluetooth. Embedded devices There are embedded devices that are designed specifically to do certain things. Some examples are: MP3 player, washing machines, Bluetooth meter reader, and many others. Evaluation of Tools Programming language The programming language is what will help to make the software. Each programming language has positive and negative points depending on the type of software that need to be developed. The pros and cons of certain programming languages are listed below. J2ME Pros Cons Offer better networking capability Available on various platforms J2ME applications are portable Rich user interface Robust security features. There is a wide range of mobiles which support Java, thus having wide range of mobile phone that can be used. Midlet cannot access all native resources without authorization. Application need to adapt for phones which have different CLDC, MIDP, JSR and Bluetooth. Table 3à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ4: J2ME Java Pros Cons Java code can work on many different platforms. Java is secure, robust and reliable. Java provides use of multithreading. Java is object oriented and allows creation of modular programs and reusable code. Java have an API for Bluetooth programming Java is slower and consumes more memory when compared to languages such as C or C++. Table 3à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ5: Java Web Servers Web servers are what will enable the data to be access over a network in a convenient way. There are a lot of web servers, some of them are described below. Apache Pros Cons Apache is open and thus can be customised easily according to requirements Multi-platform. It runs on a wide variety of operating systems, including all variants of UNIX, Windows 9x/NT, and Mac OS Apache is not regularly updated Requires more technical knowledge to install and configure Table 3à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ6: Apache IIS Pros Cons GUI mode installation. Works with a wide range of operating systems and browsers. Source code is proprietary. Can only work within Windows environment. Table 3à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ7: IIS Web Development Languages Web development language will be used to code for application at server side. There is a wide pool of language that is available. Some of them are listed below with their some of their pros and cons. PHP Pros Cons PHP is free and easy to use. PHP help to interact with database easily. Can support many operating systems, like Windows, Linux and Mac OS. PHP engine need to be installed on server to use PHP. Debugging can be lengthy for complex program. Table 3à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ8: PHP ASP.NET Pros Cons ASP.NET code is compiled at server before being sent to the browser; thus faster. ASP.NET pages are simple to write and can cope with heavy traffic without affecting performance adversely ASP.NET runs on only windows platform. ActiveX objects are platform specific, thus it will not work easily on many Web servers. Table 3à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ9: ASP.Net RDBMS Relational Database Management System (RDMS) will be used to store all data. It is very important as all sensitive data will be there and data will be used to do billing purpose. MySQL Pros Cons Easy to use. Free and Open source system. Runs on a range of different platforms. Can handle large sets of data. It is secure. Passwords are encrypted Recovery of database is not guaranteed in case of a power cut. Operates over known IP ports which facilitate the task of intruders Table 3à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ10: MySQL PostgreSQL Pros Cons It is a free and Open source software PostgreSQL can work on different platform PostgreSQL is very scalable and extensible It is slow compared to MySQL Lacks binary distribution for all the supported platforms. Table 3à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ11: PostgresSQL Choice of Final Tools Java is appropriate for the desktop application as it can work on many different platforms and have an API for Bluetooth. J2ME is used for the mobile application development as many mobile phones can support java and have an API for Bluetooth. Bluecove API for Bluetooth programming as it is open source and support java. PHP will be used for the web application as it is free and easy to interact with database. MySQL is more suitable for database system as it is free and work well with Web servers. Design The design section gives an overview of the structure of the software and architecture of the system. It also includes the data involved, the interfaces between system components, algorithm and protocol to be used for the system implementation. System Design Issues Several system design issues like performance, quality of service, fault tolerance, and security, which are important in the design of a system, are discussed below. Performance Issues The performance issues are concerned with the limitation of computers in term of processing power and communication capacities. These issues can be described in the followings ways: Responsiveness: It is how fast the system processes given input to give an output. The use of threading allows multiple tasks to process simultaneously. Threads can be used for processor intensive process. Threads can be implemented in Java Environment. Applications running on networks depend greatly on the load and performance of servers and also the network load itself. Server and network load balancing can be used to prevent them from being overloaded. Such technique is beyond the scope of this project. When using the Internet, there is a probability of communication delays and data being corrupted, this beyond of ones control. Throughput: It is of the system corresponds to the amount of data transmitted between the client and server in a given time interval. On a wireless network is takes a long time to establish connection between the server and the client and the latency time of HTTP is significantly high. So, the number of HTTP round trips in the application must be kept to the strict minimum. Robustness Robustness is the ability of the system to operate in the presence of incorrect input or cope with errors when the system is running. Validations check like length check and data type check can be used to prevent wrong input and catch errors where shared resources are being accessed. Interactivity Interaction with the system can be in many different ways. Data or command input to the system will make it produce certain result. Some of the ways that can interact with the system are listed below. The use of graphical user interface (GUI) to facilitate user to communicate with the system. Providing options and menus where possible instead of typing data. Users using the mobile application need to enter data via phone keypad. Use of meaningful icons, so that user can interact quickly with the system. Flexibility The web application can support multiple users at a time and can receive and process multiple requests a time. The system must be able to cope if there is significant increase in the number of users and additional resources can be added if needed to. Portability The mobile application can be run on Java enabled mobiles phones which support MIDP 2.0. The web application can run on multiples types of servers. Limit size of JAR file The mobile application has limited resources to use. So the application is obfuscated to reduce its size. The obfuscation process helps to remove unused classes and libraries. Error, Exception Handling and Fault Tolerance The application should continue to work correctly in presence of software, hardware and network faults. Errors will be caught in try-catch blocks to alert user of the error. Security Security is one of the focal point of a system. There is no system on earth which can be tagged as impenetrable. What can be done is, to make the system less vulnerable to attacks. The system needs to protect data from unauthorized users. The ways to protect the system is listed below. Users need a username and password to be able to access the system. User will be identified and authenticated before they can use the system. The database will be protected with password. Architectural Design In this section, the different components of the system are illustrated and how they interact between them. Overall Architecture The system is made up of three main components: the meter, the mobile application and the server application. The mobile application will be used to read a value via Bluetooth from the meter and will send that value via mobile network operator to the server. The connection between the mobile and the server is done via wireless connection such as GPRS, WAP, EDGE or Wi-Fi. The meter will be a simulated meter on a laptop that will be accessed via Bluetooth by a mobile application. The server will be used to host the web site and connect to the database. That database will be used to store all information needed. The figure below shows the overall architecture. Figure 4à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ7: Overall architecture Detailed architecture Figure 4à ¢Ã¢â€š ¬Ã¢â‚¬Ëœ8: Component diagram <